.
Eloquence B.07.10 contact contact


DBINFO Modes

 
.
  Eloquence implements all DBINFO modes that are provided with TurboIMAGE. For each DBINFO mode a short functional overview is provided with additional notes to describe specifc Eloquence behavior or limitations. For a detailed description of the DBINFO modes please refer to the TurboIMAGE documentation.


Contents

Additional database documentation

Related documentation


TurboIMAGE DBINFO modes

Eloquence provides all DBINFO modes. For each DBINFO mode a short description is provided along with notes that describe possible Eloquence specific behavior.

DBINFO mode 101

Mode 101:  Item Number

Mode 101 defines the type of access available for a specific item.

Qualifier  identifies the data item name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | +/- Data item number               |
-----------------------------------------------------

           If the data item number is positive, the user class has only
           read access to the data item.  If the number is negative, the
           data item can be updated or the entry containing it can be
           added or deleted in at least one data set.

Notes:

- Data item number is always negative since Eloquence does
  not support item level security. All data items are considered 
  writable.

DBINFO mode 102

Mode 102:  Item Name

Mode 102 describes a specific data item.

Qualifier  identifies the data item name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|     1-8      | Data item name                     |
-----------------------------------------------------
|      9       | One of the following data types    |
|              | followed by a blank:               |
|              |        I, J, K, R, U, X, Z, P      |
-----------------------------------------------------
|      10      | Sub-item length                    |
-----------------------------------------------------
|      11      | Sub-item count                     |
-----------------------------------------------------
|      12      | 0                                  |
-----------------------------------------------------
|      13      | 0                                  |
-----------------------------------------------------

           The data item name is left-justified and will be padded with
           blanks if the name is shorter than 16 characters.

Notes:

- Element 12 returns the Eloquence format number which
  can be defined in the schema processor or modified in 
  DBUTIL (B.07.00).

- The 'R' item type is supported in TurboIMAGE compatibility 
  only, values are expected to be encoded in IEEE format.
  Native Eloquence considers this an 'E' type.

- The 'J' item type is supported in TurboIMAGE compatibility
  only. Native Eloquence considers this an 'I' type.

DBINFO mode 103

Mode 103:  Items in Database

Mode 103 identifies data items available in the database and displays the
type of access allowed.  This mode does not identify unreferenced data
items, that is, those items that are defined in the item section of the
schema but are not referenced by at least one data set.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Item count x                       |
-----------------------------------------------------
|      2       | +/- Data item number 1             |
-----------------------------------------------------
|      :       | :                                  |
-----------------------------------------------------
|    n + 1     | +/- Data item number n             |
-----------------------------------------------------

           If the data item number is positive, the user class has only
           read access to the data item.  If the number is negative, the
           user class has both read and write access to the given data
           set.  The data items are listed in data item number order.

Notes:

- Data item number is always negative since Eloquence does
  not support item level security. All data items are considered 
  writable.

DBINFO mode 104

Mode 104:  Items in Data Set

Mode 104 identifies data items available in a specific data set and the
type of access allowed.

Qualifier  identifies the data set name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Item count x                       |
-----------------------------------------------------
|      2       | +/- Data item number 1             |
-----------------------------------------------------
|      :       | :                                  |
-----------------------------------------------------
|    n + 1     | +/- Data item number n             |
-----------------------------------------------------

           If the data item number is positive, the user class has only
           read access to the data item.  If the number is negative, the
           user class has both read and write access in the given data
           set.  The data items are listed in order of occurrence in data
           entry.

Notes:

- Data item number is always negative since Eloquence does
  not support item level security. All data items are considered 
  writable.

DBINFO mode 113

Mode 113:  BTREEMODE1 and Wildcard Character

Mode 113 gives the settings of BTREEMODE1 and wildcard character in the
root file as well as current DBOPEN (DBU).

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | btreemode1 setting in root file    |
|              | 0 if btreemode1 is off             |
|              | 1 if btreemode1 is on              |
-----------------------------------------------------
|      2       | The first byte (8 bits) is         |
|              | alwasys 0. The second byte         |
|              | (8 bits) represents c, where c     |
|              | is the current wildcard character. |
|              | For example, if the current        |
|              | wildcard character is @, the       |
|              | element's hex value will be $0040, |
|              | or decimal 64.                     |
|              | This is from the root file         |
-----------------------------------------------------
|      3       | Highest B-Tree argument version    |
|              | supported (0 for the first B-Tree  |
|              | release version).                  |
-----------------------------------------------------
|      4       | Number of sets with B-Trees        |
|              | indices attached.                  |
-----------------------------------------------------
|      5       | btreemode1 setting for DBOPEN      |
|              | 0 if btreemode1 is off             |
|              | 1 if btreemode1 is on              |
-----------------------------------------------------
|      6       | The first byte (8 bits) is         |
|              | alwasys 0. The second byte         |
|              | (8 bits) represents c, where c     |
|              | is the current wildcard character. |
|              | For example, if the current        |
|              | wildcard character is @, the       |
|              | element's hex value will be $0040, |
|              | or decimal 64.                     |
|              | This is for the current DBOPEN.    |
-----------------------------------------------------
|     7-16     | (reserved)                         |
-----------------------------------------------------

Notes:

- Btreemode1 is not supported with Eloquence B.07.00 PR#6
  and static values are returned.

  Element   Value
  1         Always 0
  2         Default wildcard (2nd character) is '@'
  3-4       Always 0
  5         As defined by DBCONTROL mode 15, defaults to 0
  6         As defined by DBCONTROL mode 15, default wildcard is '@'
  7-16      (Binary) zero

  DBCONTROL mode 15 is not supported with B.07.00

DBINFO mode 201

Mode 201:  Set Number

Mode 201 defines the type of access available for a specific data set.

Qualifier  identifies the data set name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | +/- Data set number                |
-----------------------------------------------------

           If the data set number is positive, the user class has only
           read access.  If the number is negative, the user class has
           both read and write access.

DBINFO mode 202

Mode 202:  Set Name

Mode 202 describes a specific data set.

Qualifier  identifies the data set name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|     1-8      | Data set name                      |
-----------------------------------------------------
|      9       | One of the following set types     |
|              | followed by a blank:               |
|              |        M, A, D                     |
-----------------------------------------------------
|      10      | Entry length                       |
-----------------------------------------------------
|      11      | Blocking factor                    |
-----------------------------------------------------
|      12      | 0                                  |
-----------------------------------------------------
|      13      | 0                                  |
-----------------------------------------------------
|    14-15     | Number of entries in set           |
-----------------------------------------------------
|    16-17     | Capacity of set                    |
-----------------------------------------------------

           The data set name is left-justified and will be padded with
           blanks if the name is shorter than 16 characters.

Notes:

- Element 11 returns always 0 since blocking factor does not 
  apply to Eloquence.

- Capacity in Eloquence returns the highest record number ever 
  used for the data set. The EQ3K_MINCAPACITY environment variable
  may be used to specify a minimum value.

DBINFO mode 203

Mode 203:  Sets in Database

Mode 203 identifies all data sets available in a database and the type of
access allowed.  If you are using third-party indexing, this mode does
not show third-party index files.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Set count x                        |
-----------------------------------------------------
|      2       | +/- Data set number 1              |
-----------------------------------------------------
|      :       | :                                  |
-----------------------------------------------------
|    n + 1     | +/- Data set number n              |
-----------------------------------------------------

           If the data set number is positive, the user class has only
           read access to the data set and possibly is in the write class
           list of specific data item(s).  If the number is negative, the
           user class has both read and write access.  The data sets are
           listed in data set number order.

DBINFO mode 204

Mode 204:  Sets with Item

Mode 204 identifies all data sets available that contain a specified
data item and indicates the type of access allowed.

Qualifier  identifies the data item name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Set count x                        |
-----------------------------------------------------
|      2       | +/- Data set number 1              |
-----------------------------------------------------
|      :       | :                                  |
-----------------------------------------------------
|    n + 1     | +/- Data set number n              |
-----------------------------------------------------

           If the data set number is positive, the user class has only
           read access to the data set and possibly is in the write class
           list of specific data item(s).  If the number is negative, the
           user class has both read and write access.  The data sets are
           listed in data set number order.

DBINFO mode 205

Mode 205:  Set Capacity

Mode 205 is an extension of mode 202 with dynamic capacity expansion
information.

Qualifier  identifies the data set name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|     1-8      | Data set name                      |
-----------------------------------------------------
|      9       | One of the following set types     |
|              | followed by a blank:               |
|              |        M, A, D                     |
-----------------------------------------------------
|      10      | Entry length                       |
-----------------------------------------------------
|      11      | Blocking factor                    |
-----------------------------------------------------
|      12      | 0                                  |
-----------------------------------------------------
|      13      | 0                                  |
-----------------------------------------------------
|    14-15     | Number of entries in set           |
-----------------------------------------------------
|    16-17     | Capacity of set                    |
-----------------------------------------------------
|    18-19     | High-water mark                    |
-----------------------------------------------------
|    20-21     | Maximum capacity                   |
-----------------------------------------------------
|    22-23     | Initial capacity                   |
-----------------------------------------------------
|    24-25     | Incremental number of entries      |
-----------------------------------------------------
|      26      | Incremental percent                |
-----------------------------------------------------
|      27      | Dynamic capacity expansion flag    |
|              | (0 = off, 1 = on)                  |
-----------------------------------------------------

           The data set name is left-justified and will be padded with
           blanks if the name is shorter than 16 characters.

           Mode 205 can be used for any master or detail data set with or
           without dynamic capacity expansion capability.

           Mode 205 allows users to obtain information on dynamic data
           set capacity expansion programmatically.  It is an extension
           of mode 202 to include dynamic capacity expansion information
           such as maximum capacity, initial capacity, incremental number
           of entries, incremental percent, and the dynamic capacity
           expansion flag (0 for off and 1 for on) for the data set.

Notes:

- Eloquence returns static values for some elements

  Element   Value
  11        Returns 0 since blocking factor does not 
            apply to Eloquence.
  18-19     Returns 0
  20-21     Returns 2^31-1 (2147483647)
            Capacity does not apply to Eloquence
  22-23     Returns 0
  24-25     Returns 1
  26        Returns 0
  27        Returns 1 to indicate that data set expands on demand.

- Dynamic extension of a data set is handled by the data base 
  server and implementation details like blocking factor, water 
  marks or initial capacity are not available or do not apply.

- Capacity in Eloquence returns the highest record number ever 
  used for the data set. The EQ3K_MINCAPACITY environment variable
  may be used to specify a minimum value.

DBINFO mode 206

 Mode 206:  Number of Data Set Chunks

 Mode 206 gives the number of chunks in a data set in short format.

 Qualifier  identifies the data set name or number for which the
            information is requested.

 Buffer     returns the following (note that each element is a halfword or
            two bytes):

 -----------------------------------------------------
 |   Element    |              Contents              |
 -----------------------------------------------------
 |      1       | # of chunks in a jumbo data set    |
 -----------------------------------------------------

            If the data set is not a jumbo data set, zero is returned
            for the number of chunks.

 Notes:

 - Eloquence returns static value of 0. The concept of JUMBO 
   data sets does not apply to Eloquence.

DBINFO mode 207

Mode 207:  Size of Data Set Chunks

Mode 207 identifies the size of each chunk in terms of IMAGE records
in addition to providing the number of chunks.

Qualifier  identifies the data set name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | # of chunks in a jumbo data set    |
-----------------------------------------------------
|      2       | 0                                  |
-----------------------------------------------------
|      3-4     | Size of chunk 1                    |
|              | (# entries, not # of blocks!)      |
-----------------------------------------------------
|      5-6     | Size of chunk 2                    |
|              | (# entries, not # of blocks!)      |
-----------------------------------------------------
|      7-8     | ...                                |
-----------------------------------------------------
|     2n+3     | Size of chunk n                    |
|              | (# entries, not # of blocks!)      |
-----------------------------------------------------

           Total size: (n + 1) * 4 bytes.

           If the data set is not a jumbo data set, zero is returned
           for the number of chunks.

Notes:

- Eloquence returns static value of 0 for element 1 and 2. 
  The concept of JUMBO data sets does not apply to Eloquence.

DBINFO mode 208

Mode 208:  Primary and Actual Capacity

Mode 208 returns the primary and actual capacity.

Qualifier  identifies the data set name or number for which the
           information is requested.

Buffer     must be at least a 64-byte record and returns the following
           (each element is a 32-bit Word):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Primary (hashing) capacity         |
|              | for masters, 0 for details         |
-----------------------------------------------------
|      2       | Current capacity,                  |
|              | including expansions               |
-----------------------------------------------------
|      3       | Maximum capacity                   |
-----------------------------------------------------
|      4       | Expansion threshold:               |
|              | -1 .. 100  percentage              |
|              | -1  this value means expansion     |
|              |     not triggered by percentage,   |
|              |     or it is a non-expandable set  |
-----------------------------------------------------
|      5       | Delete chain free head             |
|              | (0 for non-expanded masters)       |
-----------------------------------------------------
|      6       | high-water mark                    |
|              | (0 for non-expanded masters)       |
-----------------------------------------------------
|      7       | Expansion threshold:               |
|              | -1 .. 2  billion blocks            |
|              | -1  this value means expansion     |
|              |     not triggered by traversing #  |
|              |     blocks without success, or     |
|              |     it is a non-expandable set     |
-----------------------------------------------------
|     8-16     | Reserved; 0 is returned            |
-----------------------------------------------------

DBINFO mode 208 does not return an expandable flag, while DBINFO 205 returns
an expandable flag. The flag can also be deduced by comparing the current and
maximum capacities in DBINFO 208.

DBINFO mode 208 returns information about internals that will be meaningful to
only a few customers.

Notes:

- Eloquence returns mostly static values 

  Element   Value
  1         Always 0 because we don't use hashing
  2         Current number of entries in data set
  3         2^31-1 (2147483647) for max. capacity
  4         -1 for no expansion threshold
  5         0 for no delete chain head free head
  6         0 for no high water mark
  7         -1 for no expansion threshold

- This DBINFO mode exposes some TurboIMAGE implementation
  details that have no corresponding equivalent in Eloquence.

DBINFO mode 209

Mode 209:  B-Tree Attachment

Mode 209 informs whether or not a B-Tree exists for a master.

Qualifier  is a master data set name or number.

Buffer     must be at least a 64-byte record and returns the following
           (each element is a 16-bit Word):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | 0 if no b-tree index exists        |
|              | 1 if b-tree index exists           |
-----------------------------------------------------
|      2       | 0 if attached B-Tree not damaged   |
|              |   or index does not exist          |
|              | 1 if the attached B-Tree index     |
|              |   is damaged                       |
-----------------------------------------------------
|      3       | For internal use                   |
-----------------------------------------------------

Notes:

- Btreemode1 is not supported with Eloquence B.07.00 PR#6
  and static values are returned.

  Element   Value
  1         Returns 0, btreemode1 is not supported
  2         Returns 0

DBINFO mode 301

Mode 301:  Paths

Mode 301 identifies the paths defined for a specified data set.

Qualifier  identifies the data set name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Path count x                       |
-----------------------------------------------------
|      2       | Data set number of path 1          |
-----------------------------------------------------
|      3       | Search item number of path 1       |
-----------------------------------------------------
|      4       | Sort item number of path 1         |
-----------------------------------------------------
|      :       | :                                  |
-----------------------------------------------------
|     3n-1     | Data set number of path n          |
-----------------------------------------------------
|      3n      | Search item number of path n       |
-----------------------------------------------------
|     3n+1     | Sort item number of path n         |
-----------------------------------------------------

           Elements 2 to 4 are repeated for each path.

           If qualifier specifies a master data set, the set number
           identifies the detail data set.

           If qualifier specifies a detail data set, the set number
           identifies the master data set.

           If qualifier specifies a master data set, the item numbers
           identify items in the detail data sets.  If you do not have
           access to a search item, it is not included in the path count
           and the path information is not returned.  If a sort item does
           not exist or you do not have access to it, the sort item
           number is zero.

           Path designators are presented in the order in which they
           appear in the schema.

Notes:

- Since Eloquence does not support item level security
  the search and sort item are always returned.

DBINFO mode 302

Mode 302:  Key or Search Item

Mode 302 identifies the key or search item for a specified data set.  For
this mode the two qualifiers are shown separately.

Qualifier  identifies the master data set name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Key item number                    |
-----------------------------------------------------
|      2       | 0                                  |
-----------------------------------------------------

           If qualifier specifies a master data set, the key item number
           is the number in the master set.  The number is 0 if you do
           not have access to the key item.

OR

Qualifier  identifies the detail data set name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Search item number                 |
-----------------------------------------------------
|      2       | Master data set number             |
-----------------------------------------------------

           If qualifier specifies a detail data set, the primary search
           item and the related master data set number are returned.
           Both numbers are 0 if you do not have access to the search
           item.

Notes:

- Since Eloquence does not support item level security
  the search item is always returned.

DBINFO mode 401

Mode 401:  Logging

Mode 401 obtains information related to logging.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|     1-4      | Log identifier name                |
-----------------------------------------------------
|      5       | Database log flag                  |
-----------------------------------------------------
|      6       | User log flag                      |
-----------------------------------------------------
|      7       | Transaction flag                   |
-----------------------------------------------------
|     8-9      | User transaction number            |
-----------------------------------------------------

           The log identifier name is left-justified and padded with
           blanks if shorter than 8 characters.

           If the database is enabled for logging, the database log flag
           is 1; otherwise it is 0.

           If you are logging, the user log flag is 1; otherwise it is 0.

           If you have a transaction in progress, the transaction flag is
           1; otherwise it is 0.

           The user transaction number is one word.

Notes:

- Eloquence does not support user mode logging and
  returns static values.

  Element   Value
  1-4       spaces
  5-7       0
  8         0

DBINFO mode 402

Mode 402:  ILR

Mode 402 returns information about Intrinsic Level Recovery (ILR).

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | ILR log flag                       |
-----------------------------------------------------
|      2       | Calendar date (mmddyy)             |
-----------------------------------------------------
|     3-4      | Clock time (one word in format     |
|              | hhmmsstt)                          |
-----------------------------------------------------
|      5       | 0                                  |
-----------------------------------------------------
|     6-14     | _                                  |
-----------------------------------------------------
|    15-16     | Reserved                           |
-----------------------------------------------------

           If the database is enabled for ILR, the ILR log flag is 1;
           otherwise it is 0.

           The calendar date is the date ILR was enabled.

           The clock time is the time ILR was enabled.

           Element 5 is always 0.

           _ indicates blank.  Elements 6 to 14 are always blank.

           Elements 15 and 16 are reserved.

Notes:

- ILR does not apply to Eloquence, static values are returned.

  Element   Value
  1         0
  2         0
  3-4       0

DBINFO mode 403

Mode 403:  Dynamic Roll-Back

Mode 403 obtains information related to dynamic transaction activity on a
given database.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|     1-4      | Log identifier name                |
-----------------------------------------------------
|      5       | Database log flag                  |
-----------------------------------------------------
|      6       | User log flag                      |
-----------------------------------------------------
|      7       | Logical transaction flag           |
-----------------------------------------------------
|     8-9      | User transaction number            |
-----------------------------------------------------
|    10-11     | XM log set size (in megabytes)     |
-----------------------------------------------------
|      12      | XM log set type                    |
-----------------------------------------------------
|      13      | Database attached flag             |
-----------------------------------------------------
|      14      | Dynamic transaction flag           |
-----------------------------------------------------
|    15-26     | XM log set name                    |
-----------------------------------------------------

           The log identifier name is left-justified and padded with
           blanks if shorter than 8 characters.

           If the database is enabled for logging, the database log flag
           is 1; otherwise it is 0.

           If you are logging, the user log flag is 1; otherwise it is 0.

           If no logical transaction is in progress, the transaction flag
           is 0.  If a static transaction is in progress, the flag is set
           to 1; if a multiple database transaction is in progress, the
           flag is set to 2.

           The user transaction number is one word.

           The Transaction Management (XM) log set is measured in
           megabytes.

           If the XM log set is circular, the log set type is CR;
           otherwise it is LN indicating a linear log.

           If the database is attached to XM, the database attached flag
           is 1; otherwise it is 0.

           If the user is processing a dynamic transaction, the dynamic
           transaction flag is 1; otherwise it is 0.

           If the database is associated with the default XM user log
           set, the XM log set name element contains blanks; otherwise it
           contains the name of the XM log set.

Notes:

- This mode returns implementation details on transactions
  that do not apply to Eloquence, static values are 
  returned:

  Element   Value
  1-4       spaces
  5         0, user mode logging is not supported
  6         0, user mode logging is not supported
  7         0, static transactions are not supported
  8-9       returns the transaction identifier or zero if no 
            (dynamic) transaction is active
  10-11     0, does not apply since log size is dynamic
  12        returns 'LN'
  13        returns 1
  14        return the current transaction nesting level
  15-26     spaces

DBINFO mode 404

Mode 404:  Logging Subsystem Information

Mode 404 returns information about multiple database transactions.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Database log flag                  |
-----------------------------------------------------
|      2       | User log flag                      |
-----------------------------------------------------
|      3       | Roll-back log flag                 |
-----------------------------------------------------
|      4       | ILR log flag                       |
-----------------------------------------------------
|      5       | MUSTRECOVER flag                   |
-----------------------------------------------------
|      6       | Database remote flag               |
-----------------------------------------------------
|      7       | Logical transaction flag           |
-----------------------------------------------------
|     8-11     | Log identifier name                |
-----------------------------------------------------
|    12-13     | Log index                          |
-----------------------------------------------------
|    14-15     | Multiple database transaction ID   |
-----------------------------------------------------
|      16      | Number of databases involved in    |
|              | the multiple database transaction  |
-----------------------------------------------------
|    17-31     | Base IDs of the databases involved |
|              | in the multiple database           |
|              | transaction                        |
-----------------------------------------------------

           If the database is enabled for logging, the database log flag
           is 1; otherwise it is 0.

           If you are logging, the user log flag is set to 1; otherwise
           it is 0.  If a user accesses the database with a DBOPEN mode
           5, this flag is set to 0.

           If the database is enabled for roll-back logging, the
           roll-back log flag is set to 1; otherwise it is 0.

           If the database is enabled for ILR, the ILR log flag is set to
           1; otherwise it is 0.

           If the database is enabled for MUSTRECOVER, the MUSTRECOVER
           flag is set to 1; otherwise it is 0.

           If the database resides on a remote system, the database
           remote flag is set to 1.  If the database resides on the local
           system, the flag is set to 0.

           If no logical transaction is in progress, the transaction flag
           is set to 0.  If a static transaction is in progress, the flag
           is set to 1.  If a multiple database transaction is in
           progress, the flag is set to 2.

           The log index is used to call the WRITELOG intrinsic.  It is
           set to 0 if logging is not used.

           The transaction ID represents a multiple or single database
           transaction.

           Elements 16-31 are set when a multiple database transaction is
           in progress.

Notes:

- This mode returns implementation details on transactions
  that do not apply to Eloquence, static values are 
  returned:

  Element   Value
  1         0, user mode logging is not supported
  2         0, user mode logging is not supported
  3         0, does not apply to Eloquence
  4         0, does not apply to Eloquence
  5         0, does not apply to Eloquence
  6         0, does not apply to Eloquence
  7         0, static transactions are not supported
  8-11      spaces
  12-13     0, does not apply to Eloquence
  14-15     0, transactions are not data base specific
  16        0, transactions are not data base specific
  17-31     0, transactions are not data base specific

DBINFO mode 406

Mode 406:  Database Information

Mode 406 returns information about fully qualified database name and open
mode.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|     1-14     | Fully qualified database name,     |
|              | left justified, blank trailing.    |
-----------------------------------------------------
|      15      | Open mode for current DBOPEN.      |
-----------------------------------------------------
|      16      | Root file version of the database. |
|              | In the form Cn where C is          |
|              | uppercase ASCII and n is a number. |
|              | For example, C2 or C3.             |
-----------------------------------------------------
|    17-24     | For internal use.                  |
-----------------------------------------------------
|    25-32     | Reserved                           |
-----------------------------------------------------

Notes:

- Element 1-14 returns the data base name truncated to 28 characters

- Element 15 returns the mode specified to DBOPEN, not the
  native mode the data base is opened with

- Element 16 returns the characters 'EQ' to desugnate Eloquence.

- Element 17 returns an internal version number for the data 
  base schema

- Element 18 returns the number of data sets in the data base

- Element 19 returns the number of items in the data base

- Element 20 returns the number of index items in the data base

DBINFO mode 501

Mode 501:  Subsystem Access

Mode 501 checks subsystem access to the database.  Refer to the DBUTIL
>>SHOW and >>SET commands described in chapter 8 for more information.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Subsystem access                   |
-----------------------------------------------------

           The following values are used for subsystem access:

           0       No access
           1       Read access
           3       Read/write access

Notes:

- Eloquence by default returns 3 (RW) for element 1.

DBINFO mode 502

Mode 502:  Critical Item Update

Mode 502 checks the critical item update (CIUPDATE) option settings for
the database and the current DBOPEN. The CIUPDATE option is set for the
database with the DBUTIL >>SET command and then, depending on the
setting, can be enabled or disabled with DBCONTROL for the current
DBOPEN. Refer to the discussion of DBCONTROL in this chapter and the
descriptions of the DBUTIL >>SHOW and >>SET commands in chapter 8 for
more information.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Critical item update flag          |
-----------------------------------------------------
|      2       | Current setting for accessor       |
-----------------------------------------------------

           For element 1, the following values are used for the CIUPDATE
           option setting specified with DBUTIL for the database:

           0       Critical item update is disallowed (default).
           1       Critical item update is allowed.
           2       Critical item update is on.

           For element 2, the following values are used for the current
           DBOPEN setting specified with DBCONTROL:

           0       Critical item update is disabled for this accessor.
           1       Critical item update is enabled for this accessor.

Notes:

- Eloquence by default returns 1 for element 1 (CIUPDATE allowed)
  and the current value of the CIUPDATE flag for element 2.

- CIUPDATE is always considered allowed. The default value 
  of the CIUPDATE flag is 0 (disabled) and can be changed
  using DBCONTROL mode 5 and 6. If enabled, any DBUPDATE 
  mode 1 is mapped to DBUPDATE mode 2.

DBINFO mode 901

Mode 901:  Language

Mode 901 obtains the Native Language attribute of the database.  It
returns the MPE/iX code for the language attribute.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Language ID                        |
-----------------------------------------------------

Notes:

- Eloquence always returns a language ID of zero


DBINFO modes specific to Eloquence

DBINFO modes 701 to 705 are specific to Eloquence. They are equivalent to the native Eloquence DBINFO modes 501 to 505.

DBINFO mode 701

Mode 701:  Index Item Number

Mode 701 returns the item number of the specified index item.

Qualifier  identifies the index item name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Index item number                  |
-----------------------------------------------------

DBINFO mode 702

Mode 702:  Index Item Name

Mode 702 describes a specific index item.

Qualifier  identifies the index item name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|     1-8      | Index item name                    |
-----------------------------------------------------
|      9       | Number of segments                 |
-----------------------------------------------------
|      10      | Reserved (zero)                    |
-----------------------------------------------------
|      11      | Data Item number (segment 1)       |
-----------------------------------------------------
|      12      | Length in bytes (Segment 1)        |
-----------------------------------------------------
|      13      | Reserved (zero)                    |
-----------------------------------------------------
|      :       | :                                  |
-----------------------------------------------------
|    3n+8      | Data Item number (segment n)       |
-----------------------------------------------------
|    3n+9      | Length in bytes (segment n)        |
-----------------------------------------------------
|    3n+10     | Reserved (zero)                    |
-----------------------------------------------------

           The index item name is left-justified and will be padded
           with blanks if the name is shorter than 16 characters.

DBINFO mode 703

Mode 703:  Index Items in Database

Mode 703 identifies data items available in the database and displays the
type of access allowed.  This mode does not identify unreferenced data
items, that is, those items that are defined in the item section of the
schema but are not referenced by at least one data set.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Item count x                       |
-----------------------------------------------------
|      2       | Index item number 1                |
-----------------------------------------------------
|      :       | :                                  |
-----------------------------------------------------
|    n + 1     | Index item number n                |
-----------------------------------------------------

           The items are listed in index item number order.

DBINFO mode 704

Mode 704:  Index Items in Data Set (also mode 831)

Mode 704 identifies index items available in a specific data set.

Qualifier  identifies the data set name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Item count x                       |
-----------------------------------------------------
|      2       | Index item number 1                |
-----------------------------------------------------
|      :       | :                                  |
-----------------------------------------------------
|    n + 1     | Index item number n                |
-----------------------------------------------------

           The index items are listed in order of occurrence in the
           schema.

Notes:

- DBINFO mode 704 is identical to DBINFO mode 831 (TPI)

DBINFO mode 705

Mode 705:  Sets with Index Item (also mode 821)

Mode 705 identifies all data sets available that contain a specified
index item and indicates the type of access allowed.

Qualifier  identifies the index item name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Set count x                        |
-----------------------------------------------------
|      2       | +/- Data set number 1              |
-----------------------------------------------------
|      :       | :                                  |
-----------------------------------------------------
|    n + 1     | +/- Data set number n              |
-----------------------------------------------------

           If the data set number is positive, the user class has only
           read access to the data set and possibly is in the write class
           list of specific data item(s).  If the number is negative, the
           user class has both read and write access.  The data sets are
           listed in data set number order.

Notes:

- DBINFO mode 705 is identical to DBINFO mode 821 (TPI)


TPI-related DBINFO modes

DBINFO modes 8## are related to TPI.

DBINFO mode 801

Mode 801:  Describes the Third-Party product enabled on the database.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

--------------------------------------------------------------
|   Element    |              Contents                       |
--------------------------------------------------------------
|    1-20      |  Product name (blank if none installed)     |
--------------------------------------------------------------
|    21-25     |  Version number                             |
--------------------------------------------------------------
|    26-27     |  Date of current installation on a database |
|              |  (CALENDAR intrinsic format)                |
--------------------------------------------------------------
|    28-29     |  Time of current installation on a database |
|              |  (CLOCK intrinsic format)                   |
--------------------------------------------------------------

	   Product name is "Eloquence A.xx.yy" padded with spaces
	   where xx is the major and yy the minor product version.
	   For example "Eloquence A.06.31"

	   The version number format is A.xx.yy.zz where xx is the
	   major and yy the minor product version and zz the patch
	   level. For example "A.06.31.01"

	   The installation date/time are always zero.

DBINFO mode 802

Mode 802:  Returns the number of external and internal index
           files for this database.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

--------------------------------------------------------------
|   Element    |              Contents                       |
--------------------------------------------------------------
|    1         |  Number of external files (may be 0).       |
--------------------------------------------------------------
|    2         |  Number of internal files (may be 0).       |
--------------------------------------------------------------
|    3-10      |  Reserved for future use. Blanks for now.   |
--------------------------------------------------------------

Notes:

- Eloquence returns 0 for the element 1 and element 2.

DBINFO mode 803

Mode 803:  Indicates if TPI is enabled on the database.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

--------------------------------------------------------------
|   Element    |              Contents                       |
--------------------------------------------------------------
|    1         |  Binary zero if third party indexing is     |
|              |  not enabled and binary one if third party  |
|              |  indexing is enabled.                       |
--------------------------------------------------------------

Notes:

- Eloquence returns 1 for the element 1 since indexing is 
  always enabled.

DBINFO mode 811

Mode 811:  Describes the access available for a TurboIMAGE/XL
           data item or third party key.

Qualifier

--------------------------------------------------------------
|   Element    |              Contents                       |
--------------------------------------------------------------
|    1-8       |  TurboIMAGE/XL data item name or number     |
|              |  or third party key name or number.         |
--------------------------------------------------------------
|    9-16      |  optional TurboIMAGE/XL data set name or    |
|              |  number. When to be ignored, first          |
|              |  character must be a blank or a ";".        |
--------------------------------------------------------------

Buffer     returns the following (note that each element is a halfword or
           two bytes):

--------------------------------------------------------------
|   Element    |              Contents                       |
--------------------------------------------------------------
|    1         |  TurboIMAGE/XL data item number or third    |
|              |  party key number (10001 - 19999).          |
--------------------------------------------------------------

Additional notes from SuperDex manual:

For Independent paths, the dataset number should be set to 200.
This is true for any DBINFO mode 8##.

TurboIMAGE Item number or Third-Party search item number. If the
qualifier is a TurboIMAGE item and a Third-Party search item, this
value will always equal the TurboIMAGE item number.

Notes:

- Eloquence ignores the optional data set name or number 
  specification which can be passed in the qualifier argument.

- If the item name or number passed in the qualifier describes
  an index item, the Eloquence specific DBINFO mode 701 can be
  used as an alternative.

DBINFO mode 812

Mode 812:  Describes a third party key. Also, used to determine
           third party key name and key type for third party keys
           that are not named the same as a TurboIMAGE/XL data item.

Qualifier

--------------------------------------------------------------
|   Element    |              Contents                       |
--------------------------------------------------------------
|    1-8       |  TurboIMAGE/XL data item name or number     |
|              |  or third party key name or number.         |
--------------------------------------------------------------
|    9-16      |  optional TurboIMAGE/XL data set name or    |
|              |  number. When to be ignored, first          |
|              |  character must be a blank or a ";".        |
--------------------------------------------------------------

Buffer     returns the following (note that each element is a halfword or
           two bytes):

--------------------------------------------------------------
|   Element    |              Contents                       |
--------------------------------------------------------------
|     1-8      | Data item name                              |
--------------------------------------------------------------
|      9       | One of the following data types             |
|              | followed by a blank:                        |
|              |        I, J, K, R, U, X, Z, P               |
--------------------------------------------------------------
|      10      | Sub-item length                             |
--------------------------------------------------------------
|      11      | Sub-item count                              |
--------------------------------------------------------------
|      12      | 0                                           |
--------------------------------------------------------------
|      13      | 0                                           |
--------------------------------------------------------------

           The data item name is left-justified and will be padded with
           blanks if the name is shorter than 16 characters.

Notes:

- Eloquence ignores the optional data set name or number 
  specification which can be passed in the qualifier argument.

- If the item name or number passed in the qualifier describes
  a compound index item (that has multiple index segments),
  element 9 returns spaces and elements 10 and 11 return zeros.

- If the item name or number passed in the qualifier describes
  an index item containing only a single segment, the item type
  is returned in element 9. Element 10 returns the index segment
  length (in bytes) and element 11 is always 1 (Eloquence currently
  does currently not support using an array in index definitions).

- If the item name or number passed in the qualifier describes
  an index item, the Eloquence specific DBINFO mode 702 can be
  used as an alternative.

DBINFO mode 813

Mode 813:  Items in Database (including index items)

Mode 813 describes all items in a database, including all Third-Party
search items. Externals are the same as DBINFO mode 103.

Qualifier  is ignored.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Item count x                       |
-----------------------------------------------------
|      2       | +/- Data item number 1             |
-----------------------------------------------------
|      :       | :                                  |
-----------------------------------------------------
|    n + 1     | +/- Data item number n             |
-----------------------------------------------------

           If the data item number is positive, the user class has only
           read access to the data item.  If the number is negative, the
           user class has both read and write access to the given data
           set.  The data items are listed in data item number order.

Notes:

- The Eloquence specific DBINFO mode 703 can be used as an 
  alternative to return index items only.

- Item numbers are always negative since Eloquence does not
  support item level security

- Index items are listed after the data items. Index items can not
  be used as an argument to DBINFO mode 1xx.

- Since all data items in the data base and all index items are
  returned you need to be careful to avoid a buffer overflow as the
  max. number of data items is 2048 with Eloquence and up to
  1024 index items which can be defined in the schema.

DBINFO mode 814

Mode 814:  Items in Data Set (including index items)

Mode 814 describes all items in a specific dataset, including all
Third-Party search items. Externals are the same as DBINFO mode 104.

Qualifier  identifies the data set name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Item count x                       |
-----------------------------------------------------
|      2       | +/- Data item number 1             |
-----------------------------------------------------
|      :       | :                                  |
-----------------------------------------------------
|    n + 1     | +/- Data item number n             |
-----------------------------------------------------

           If the data item number is positive, the user class has only
           read access to the data item.  If the number is negative, the
           user class has both read and write access in the given data
           set.  The data items are listed in order of occurrence in data
           entry.

Notes:

- The Eloquence specific DBINFO mode 704 can be used as an 
  alternative to return index items only.

- Item numbers are always negative since Eloquence does not
  support item level security

- Index items are listed after the data items. Index items can not
  be used as an argument to DBINFO mode 1xx.

DBINFO mode 821

Mode 821:  Sets with Index Item (also mode 705)

Mode 821 identifies all data sets available that contain a specified
index item and indicates the type of access allowed.

Qualifier  identifies the index item name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Set count x                        |
-----------------------------------------------------
|      2       | +/- Data set number 1              |
-----------------------------------------------------
|      :       | :                                  |
-----------------------------------------------------
|    n + 1     | +/- Data set number n              |
-----------------------------------------------------

           If the data set number is positive, the user class has only
           read access to the data set and possibly is in the write class
           list of specific data item(s).  If the number is negative, the
           user class has both read and write access.  The data sets are
           listed in data set number order.

Notes:

- Eloquence specific DBINFO mode 705 can be used as an alternative

DBINFO mode 831

Mode 831:  Index Items in Data Set (also mode 704)

Mode 831 identifies index items available in a specific data set.

Qualifier  identifies the data set name or number for which the
           information is requested.

Buffer     returns the following (note that each element is a halfword or
           two bytes):

-----------------------------------------------------
|   Element    |              Contents              |
-----------------------------------------------------
|      1       | Item count x                       |
-----------------------------------------------------
|      2       | Index item number 1                |
-----------------------------------------------------
|      :       | :                                  |
-----------------------------------------------------
|    n + 1     | Index item number n                |
-----------------------------------------------------

           The index items are listed in order of occurrence in the
           schema.

Notes:

- Eloquence specific DBINFO mode 704 can be used as an alternative

DBINFO mode 832

Mode 832:  Identifies third party single or multiple keyword search
keys for specified data set. Returns the item number of "M" or "B"
type keys [where "M" is single or multiple keyword search key only,
"B" is both generic and multiple key] as define in DBINFO mode 833.

Qualifier

--------------------------------------------------------------
|   Element    |              Contents                       |
--------------------------------------------------------------
|    1-8       |  data set name or number                    |
--------------------------------------------------------------

Buffer     returns the following (note that each element is a halfword or
           two bytes):

--------------------------------------------------------------
|   Element    |              Contents                       |
--------------------------------------------------------------
|    1         |  n = number of keys                         |
--------------------------------------------------------------
|    2-(n+1)   |  Item number of key                         |
--------------------------------------------------------------

Notes:

- Eloquence currently returns a 0 as element 1.

- Since the Eloquence TPI implementation currently does not 
  support relational access (DBFIND mode 12) no results are 
  returned.

DBINFO mode 833

Mode 833:  Describes a specific third party key

Qualifier

--------------------------------------------------------------
|   Element    |              Contents                       |
--------------------------------------------------------------
|    1-8       |  set name or number                         |
--------------------------------------------------------------
|    9-16      |  item name or number of key                 |
--------------------------------------------------------------

Buffer     returns the following (note that each element is a halfword or
           two bytes):

--------------------------------------------------------------
|   Element    |              Contents                       |
--------------------------------------------------------------
|    1         |  third party key number. If a negative      |
|              |  value, data item can be updated. Third     |
|              |  party keys are assigned item numbers of    |
|              |  10,001 and above.                          |
--------------------------------------------------------------
|    2         |  type of key. Valid key type: G (generic    |
|              |  sorted), M (multiple key), and B (both     |
|              |  generic sorted and multiple key) followed  |
|              |  by 1 space.                                |
--------------------------------------------------------------
|    3         |  external key length (in bytes)             |
|              |  [if SICOGNOS JCW = 1, length is net of     |
|              |  extension; otherwise length includes the   |
|              |  extension (extension = detail set:         |
|              |  4 bytes, master set: search item length    |
|              |  in bytes).]                                |
--------------------------------------------------------------
|    4         |  IMAGE set number of first item in keyword  |
|              |  group, or 0 if not member of a keyword     |
|              |  group                                      |
--------------------------------------------------------------
|    5         |  IMAGE item number of first item in         |
|              |  keyword group, or 0 if not member of a     |
|              |  keyword group                              |
--------------------------------------------------------------
|    6         |  IMAGE item number of third party key       |
|              |  being qualified, or 0 if relative record   |
|              |  being qualified instead of a third party   |
|              |  key                                        |
--------------------------------------------------------------
|    7         |  length of item in element 6 above          |
|              |  (in bytes)                                 |
--------------------------------------------------------------
|    8-27      |  an integer array describing this key's     |
|              |  use of the standardized installation       |
|              |  options, as shown on the table on          |
|              |  next page                                  |
--------------------------------------------------------------
|    28        |  n = number of key components               |
--------------------------------------------------------------
|   6(n-1)+29  |  IMAGE item number of component             |
--------------------------------------------------------------
|   6(n-1)+30  |  byte offset of item [if SICOGNOS JCW = 1,  |
|              |  byte offset is ZERO relative; otherwise    |
|              |  byte offset is ONE relative.]              |
--------------------------------------------------------------
|   6(n-1)+31  |  length of component in bytes               |
--------------------------------------------------------------
|   6(n-1)+32  |  data type of data in component:            |
|              |  (I, J, K, E, R, U, X, Z, P)                |
|              |  followed by a space                        |
--------------------------------------------------------------
|   6(n-1)+33  |  IMAGE sub-item length of component         |
--------------------------------------------------------------
|   6(n-1)+34  |  IMAGE sub-item count of component          |
--------------------------------------------------------------

Array element Value

1       Case sensitivity
        0 = Case insensitive
        1 = Case sensitive

2       Parsing (treat entire argument as a key value)
        0 = No parsing
        1 = Parsing

3       Excluded words
        0 = No words excluded
        1 = Global words excluded
        2 = Key-specific words excluded

4       Values: blanks, nulls, zeros
        0 = Not indexed
        1 = Indexed

5       Native Language Support
        0 = Uses binary collating sequences
        1 = Uses NLS collating sequences

6       Update of indexes
        0 = DBPUT, DBDELETE, and DBUPDATE will update third
            party indexes.
        1 = Indexes will not be updated until a third party
            maintenance utility is invoked to update the indexes.

7       Soundex
        0 = No Soundex
        1 = Soundex

8       Boolean searches within
        0 = Common to record detail sets
        1 = Common to detail chain

9-15    Reserved for future use
        0 = Not used

16-20   Third party extensions
        0 = No extension for key.

DBINFO mode 834

Mode 834:  Describes all items grouped with the specified key.

Qualifier

--------------------------------------------------------------
|   Element    |              Contents                       |
--------------------------------------------------------------
|    1-8       |  data set name or number                    |
--------------------------------------------------------------
|    9-16      |  Third party key name or number             |
--------------------------------------------------------------

Buffer     returns the following (note that each element is a halfword or
           two bytes):

--------------------------------------------------------------
|   Element    |              Contents                       |
--------------------------------------------------------------
|    1         |  n = number of keys in this group           |
--------------------------------------------------------------
|    2-(n-1)+2 |  Set number of grouped key                  |
--------------------------------------------------------------
|    2-(n-1)+3 |  IMAGE item number of grouped key           |
--------------------------------------------------------------

Notes:

- Eloquence currently returns a 0 as element 1.

- Since Eloquence does not support grouped keys no results 
  are returned.


 
 
 
  Privacy | Webmaster | Terms of use | Impressum Revision: 2006-01-26  
  Copyright © 1995-2024 Marxmeier Software AG